Aegis AEGIS 1000 Owner's Manual download pdf (Page 8)

Display Menus

The system has been designed to be easy to operate. Whenever you press a key on the console, the top line of the display will

indicate what you are doing. To the right of that is your selection or current setting. The bottom line will show a menu of your

next options. To the lower right corner of the display is the direction arrow(s). Where possible, the up (↑), down (↓), and two-

headed arrow characters are shown on the console display to indicate which arrow keys may be pressed at that time.

When using the arrow keys to scroll through lists of units, zones, buttons, codes, and temperature zones, only the named items are

displayed. If no text description has been given to an item, it will be skipped over when scrolling through that list. You can still

enter any item number to access it directly, and then scroll up and down among the named items. To look at another specific

item, simply enter the item number followed by the Down Arrow key.

In some cases, the keypad keys (0-9, *, #) are assigned to different functions or menus. A key assignment is indicated by the

character key directly in front of the new function on the bottom line of the display. For example, if the bottom line says,

"2=DELETE", you may press the 2 key to delete. From the top-level display, each key functions as a menu choice. Simply press

the appropriate key and you will enter that menu.

Main Menu

The main menu is entered from the top-level display by pressing the ' # ' key. This menu displays all of the functions that you can

perform from the console. It is not necessary to display the main menu before selecting a function if the number for the desired

menu item is known. The following menu choices are available:

1=CONTROL 2=SECURITY

3=BUTTON 4=ALL ↓

5=TEMP 6=STATUS

7=EVENTS 8=MESSAGE ×

9=SETUP

↑

Menu 1 - Selects Control functions for controlling lights and appliances.

Menu 2 - Selects Security functions (arming, disarming, bypassing, and restoring).

Menu 3 - Allows a Button (macro) to be activated.

Menu 4 - Selects All Lights On / All Units Off commands and Leviton Scene Control commands.

Menu 5 - Allows Temperature control for Thermostats and Energy Saver Modules.

Menu 6 - Allows various status items to be displayed.

Menu 7 - Allows you to view an event log of security "happenings".

Menu 8 - Allows you to show, log, clear, say, phone, or send a message.

Menu 9 - Allows you to enter setup mode for different operating configurations.

Error Beeps

If you press a key that is invalid for the function that you are doing, the console will beep 3 times, indicating that it is not a valid

option. Look at the bottom line of the display to see what keys you can press next.

Trouble Beeps

The Aegis 1000 constantly checks the entire system for proper operation. If trouble is found, the trouble is displayed on the

bottom line and the console will beep at the rate of two beeps per second to alert you to the trouble. This feature can be turned off

if desired - See Set Up Arming, Beep On Trouble.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 72 73

No comments

Aegis AEGIS 1000 Owner's Manual Page 8